It's the smartest way to make the most of fire alarm technology. IntelliKnight is the first fire alarm system to combine addressable value and performance with exclusive built-in digital communication and distributed intelligent power. There's no other system like it. More >>

The modular design features an easy-to-use interface that simplifies procedures. Plus, this incredibly smart system can differentiate between smoke and dust particles. With IntelliKnight, you'll be notified if you need the fire department or just a maintenance crew. And you'll know exactly where to find the problem.

The lntelliknight system uses data from the sensors installed on the signalling line circuits (SLC) to set sensitivity levels for each of the zones in the system. In addition, the Model 5820XL uses the data to perform drift compensation and sensitivity checks on each of the sensors in the system.

The IntelliKnight Model 5820XL can be expanded by adding modules such as the Model 5860 Remote Annunciator, Model 5815XL Signalling Line Circuit (SLC) Expander, Model 5824 Printer Interface (for printing system reports), and the 5895XL Intelligent Power Module. The Model 5820 also features a powerful built-in dual line fire communicator that allows for reporting of all system activity to a remote monitoring location.

FEATURES

• Up to 508 addressable points. NEW!
• Supports Class A configuration for SLC (Style 6), SBUS, and Flexput circuits.
• Distributed, intelligent power.
• Drift compensation.
• Flexput I/O circuits.
• ANSI cadence pattern.
• Built-in annunciator with 80-character LCD display.
• RS-485 bus provides communication to system accessories.
• Built-in RS-232 interface for programming via PC.
• Built-in digital communicator.
• Central station reporting by Point or by Zone. NEW!
• Form C trouble relay rated at 2.5 amps at 24 VDC.
• Two Form C programmable relays rated at 2.5 amps at 24VDC.
• Uses standard wire - no shielded or twisted pair required.

System Application

The lntelliknight Model 5820XL control panel has one built-in Signalling Line Circuit (SLC) which supports 127 devices. Three additional loops can be added using the 5815XL SLC expanders to increase overall capacity to 508 devices.

The Model 5820XL's SLC loops support multiple device types:* Addressable photoelectric sensor* Addressable ionization sensor* Addressable duct housing* Addressable heat sensor

• Addressable Contact module
• Addressable Relay output module
• Addressable Notification Module

The following advanced sensor capabilities are available using the lntelliknight Model 5820XL:* Automatic drift compensation* Maintenance alert* Built-in sensor test to comply with NFPA 72 calibration testing requirements

Built-in Digital Communicator

The IntelliKnight Model 5820XL features a built-in UL listed digital communicator for remote reporting of system activity and system programming. The communicator has the ability to seize two telephone lines to report alarms and troubles to a monitoring facility. The communicator supervises two phone lines and will activate a trouble signal if a line failure is sustained for more than 45 seconds. Other communication features include: re-try if communication fails, two phone number capability, download phone number capability and touchtone or rotary dialing. The communicator is compatible with SIA, Ademco Contact ID. The format is selectable by account number.

User Interface

The lntelliknight's built-in annunciator with 80 character LCD display and large easy to-use tactile touchpad can be used for system operation, programming and maintenance. It has five LEDs for alarm, supervisory, system trouble, system silenced and system power. System operations include silencing alarms and troubles, resetting alarms and the display of alarm troubles and memory. The system's non-volatile event history buffer stores 1,000 events for viewing from the built-in or remote annunciator. System operation can be initiated with a mechanical fire fighter's key or a valid 4- to 7-digit operators code. << Back to Product

IFP-1000 is the first alarm system to provide you with the revolutionary value and performance of analog, addressable sensing technology combined with exclusive, built-in digital communication, distributed intelligent power, a modular design and an expanded, easy to use interface. Powerful features such as detector sensitivity, day/night thresholds, drift compensation and maintenance alert are delivered in this powerful FACP from Silent Knight.

The basic IFP-1000 system has a single SLC loop, which can support up to 127 Hochiki devices or 99 IDP detectors and 99 IDP modules, expandable to 1016 Hochiki devices or 792 IDP detectors and 792 IDP modules, combined with a fully integrated voice evacuation system. The control panel also has a built-in dual line digital fire communicator. The firmware has powerful features such as detector sensitivity, day/night thresholds, drift compensation and pre-trouble maintenance alert.

The Voice Integration panel places all of the critical user interface controls at the main panel. This seamless combination of fire detection and voice evacuation technology simplifies operation and programming of the entire system. The VIP system is scalable from 50 to 400 watts using a distributed amplification scheme to provide the power to the appropriate areas for evacuation coverage.

The IFP-100 is a class leading single loop analog/addressable fire alarm control/communicator system that provides you with the revolutionary value and performance of analog/addressable sensing technology combined with exclusive, built-in digital communication, distributed intelligent power, easy to use interface. Powerful features such as day/night thresholds, drift compensation and maintenance alert are delivered in this powerful FACP.

The IFP-100 system has a single SLC loop, which can support up to127 Hochiki devices or 99 IDP detectors and 99 IDP modules, combined with a fully integrated voice evacuation system. The control panel also has a built-in dual line digital fire communicator. The firmware has powerful features such as detector sensitivity, day/night thresholds, drift compensation and pre-trouble maintenance alert.
The Voice Integration Panel places all of the critical user interface controls at the main panel. This seamless combination of fire detection and voice evacuation technology simplifies operation and programming of the entire system. The VIP system is scalable from 50 to 400 watts using a distributed amplification scheme to provide the power to the appropriate areas for evacuation coverage.

The IFP-50 is an intelligent analog/addressable fire control panel. The IFP-50 system has a single SLC loop, which can support up to 50 Hochiki devices or 50 IDP detectors and 50 IDP modules. The IFP-50 has two Notification Appliance Circuits that can be programmed for notification outputs, or auxiliary power. The control panel also has a built-in dual line digital fire communicator, Form C trouble relay, and two programmable Form C relays. The firmware has powerful features such as detector sensitivity, day/night thresholds, drift compensation and pre-trouble maintenance alert.

The IFP-Net is a Fire System Manager software used to monitor up to 16 IFP series control panels (nodes) with accessories. Running on a standard PC workstation and Microsoft Windows 2000, the IFP-Net presents the user with an easy-to-use and attractive graphic user interface. It is fully customizable to adapt to a wide variety of monitoring situations and supports multiple operators monitoring all or a portion of local sites.